Compatibility with Windows Vista
2008/3/3
* Please use the drivers and application software that you have confirmed work with Windows Vista(TM).
Key to using the Compatibility List
| Yes | Will be compatible with Windows Vista. |
| - | To be confirmed |
| No | We are sorry but we have no plan to realese the compatible software with Windows Vista. |
This compatibility list was based on the test results with Windows Vista(TM) 32-bit and 64-bit Editions or later version.
32-bit Driver |
64-bit Driver |
||||
| FireWire products | FA-101 | ||||
| FA-66 | |||||
| Hi-Speed USB (USB 2.0) products | UA-1000 | SONAR LE | |||
| UA-101 | SONAR LE | Download page (USB 1 mode) |
|||
| USB products (1) | UA-1EX | ||||
| UA-25 | SONAR LE | ||||
| UA-4FX | SONAR LE VSC DXi |
||||
| USB products (2) | UA-1A | ||||
| UA-1D | |||||
| UA-1X | |||||
| UA-100/UA-100G | |||||
| UA-20 | SONAR LE | ||||
| UA-30 | |||||
| UA-3 | |||||
| UA-3D | |||||
| UA-3FX | *4 | ||||
| UA-5 | SONAR LE | ||||
| UA-700 | SONAR LE | ||||
| Other Audio Interface products | UR-80 | *3 | |||
| U-8 | |||||
| DA-2496 | |||||
32-bit Driver |
64-bit Driver |
||||
| MIDI Interfaces (1) | UM-1EX | ||||
| UM-2EX | |||||
| UM-3EX | |||||
| MIDI Interfaces (2) | UM-1/UM-1S | ||||
| UM-1X/UM-1SX | |||||
| UM-2 | |||||
| UM-550 | SONAR LE | ||||
| UM-880 | SONAR LE | ||||
| UM-4 (S-MPU64) | |||||
32-bit Driver |
64-bit Driver |
||||
| PC Series keyboards | PC-50 | SONAR LE | |||
| PC-80 | *4 SONAR LE |
||||
| PC-300 | |||||
| PCR Series keyboards | PCR-300 / PCR-500 / PCR-800 | SONAR LEPCR Editor Ver.2.1 Project5 LE Dimension LE |
|||
| PCR-M1 | SONAR LEPCR Editor Ver.1.0 | ||||
| PCR-M30 / PCR-M50 / PCR-M80 | SONAR LEPCR Editor Ver.1.0 | ||||
| PCR-1 | SONAR LEPCR Editor Ver.1.0 | ||||
| PCR-A30 | SONAR LEPCR Editor Ver.1.0 | ||||
| PCR-30 / PCR-50 / PCR-80 | SONAR LEPCR Editor Ver.1.0 | ||||
32-bit Driver |
64-bit Driver |
||||
| Mixer | M-16DX | ||||
| M-100FX | |||||
| Speaker | MA-1EX | ||||
| STUDIO Canvas | SD-20 | *4 SD-20 Editor SONAR LE |
|||
| SD-80 | *4 SONAR LE |
||||
| SD-90 | *4 SONAR LE |
||||
| SOUND Canvas | SC-8850 | *4 | |||
| SC-8820 | *4 | ||||
| SC-D70 | *4 | ||||
| Software Synthesizers | VSC-MP1 | VSC | |||
| HQ-GM2 | *1 | ||||
| HQ-QT | *1 | ||||
| HQ-OR | *1 | ||||
| R Series | R-1 | ||||
| R-09 | |||||
| R-4 | |||||
| R-4Pro | |||||
| Serial MIDI Driver | |||||
32-bit Driver |
64-bit Driver |
||||
| Synthesizers | Fantom-X6/X7/X8 | ||||
| Fantom-Xa | |||||
| Fantom-S | |||||
| JUNO-G | SONAR LE | ||||
| SH-201 | *3 | ||||
| V-Synth | |||||
| RS-70 | |||||
| Sound Modules | Fantom-XR | ||||
| V-Synth XT | |||||
| VariOS | |||||
| XV-5080 | |||||
| XV-5050 | |||||
| XV-3080 | |||||
| XV-2020 | |||||
32-bit Driver |
64-bit Driver |
||||
| BOSS BR Series | BR-1600CD | *2 | |||
| BR-1200CD | *2 | ||||
| BR-900CD | *2 | ||||
| BR-600 | |||||
| MICRO BR | *2 | ||||
| BR-864 | |||||
32-bit Driver |
64-bit Driver |
||||
| BOSS products | RC-50 | *2 | |||
| GT-PRO | |||||
| GI-20 | |||||
| DR-880 | |||||
| GS-10 | *1 | ||||
32-bit Driver |
64-bit Driver |
||||
| Roland Groove Gears | MC-808 | ||||
| MC-909 | |||||
| MV-8000 | *2 | ||||
| SP-606 | |||||
| EDIROL Groove Gear | MD-P1-S | ||||
32-bit Driver |
64-bit Driver |
||||
| Stylish Series | FP-2 | ||||
| FP-4 | |||||
| FP-5 | |||||
| FP-7 | SONAR LEAudio Key Latest Audio Key Utility Installer |
||||
| HP Series | HP107 | ||||
| HP201 | |||||
| HP203 | |||||
| HP207 | |||||
| DigiScore Series | HPi-6 | ||||
| HPi-7/HPi-7LE | |||||
| KR107 / KR105 / KR103 | |||||
| Grand Piano Series | KR115 | ||||
| KR115-R | |||||
| KR115M | |||||
| KR115M-R | |||||
| KR117M | |||||
| KR117M-R | |||||
| RG-1 | |||||
| RG-3 | |||||
| RG-7 | |||||
| RG-7-R | |||||
| Other models | RD-300sx | ||||
| RD-700sx | *2 | ||||
| RK-500 | |||||
| Arranger Series | E, G, & EXR Series | ||||
*1: The bundled Cakewalk Music Creator 2002 will not be compatible with Windows Vista.
*2: When disconnecting the USB cable, the computer will not recognize the disconnection.
*3: Windows Vista Compatibility is being evaluated for working with the bundled software such as an Editor software.
*4: The bundled software will not be compatible with Windows Vista.
Installing Dimension LE in Microsoft (R) Windows Vista (TM)
* In order to perform the following steps, you must log on to Windows as a user who has administrative privileges.
- 1. Close all currently running software (applications).
- Place the installation CD-ROM in your computer's CD-ROM drive.
* If the auto-play dialog box appears, choose [Cancel]. - From the Windows Start menu, choose "Computer."
- The screen will show the drives detected by your computer. Choose the CD-ROM drive -> CAKEWALK folder -> DIM_LE folder, and then double-click [SETUP].
- The screen will indicate "An unidentified program wants access to your computer"; click [Allow].
- The installer will start up. Follow the on-screen directions to proceed with the installation.
This completes the installation.
[Activation]
When installation is finished, you'll need to activate Dimension LE.
* Before you begin the activation process, make sure that your computer is connected to the Internet.
- Start up SONAR LE or Project5 LE, and plug-in Dimension LE.
- Dimension LE will start up, and the online activation screen will appear. Select "Take me to www.cakewalk.com to resister now." and click [OK].
* If you've already obtained a serial number, proceed to step 5. - Your Web browser will start up, and the Cakewalk online activation form will appear. Proceed with activation as directed by the form. The serial number for your software will be sent to you by e-mail.
- Note the serial number that was sent to you by e-mail.
- In the Dimension LE online activation screen, select "I registered, and was emailed the following Serial Number:" Then enter the serial number and click [OK].
This completes activation of Dimension LE.
[Limitations]
Moving a knob with the mouse does not change the screen. (The sound will change.)
[Note]
The Dimension LE programs themselves are provided on the CD-ROM included with your product.
Installing EDIROL PCR Editor Microsoft (R) Windows Vista (TM)
PCR Editor is software that lets you use your computer to create control maps for the PCR series (PCR-1/M1/30/A30/M30/50/M50/80/M80).
[Note]
The PCR Editor programs themselves are provided on the CD-ROM included with your product.
[Installation]
Install the software as follows.
* Before you carry out the following steps, you must log on to Windows as a user whose account type is Administrator.
- Close all currently running software (applications).
- In the [EDITOR] folder of the PCR CD-ROM, right-click "PcrEditor (PcrEditor.exe)". From the menu that appears, choose [Properties].
- Click the [Compatibility] tab, the window of compatibility opens.
- Check the [Run this program in compatibility mode for:] in the colum of [Compatibility mode]
- In the "Compatibility mode" list, select "Windows XP (Service Pack 2)."
- Click [OK], close the property.
- Double-click "PcrEditor (PcrEditor.exe)".
- "An unidentified program wants access to your computer" will appear click [allow].
- The installer will start up. When the "PCR Editor Setup" screen appears, click [Next].
- A screen will indicate "Please read the following license agreement carefully." Read the license agreement, and if you accept the terms, click [Yes]. If you click [No], the installation will be terminated.
- The "Choose Destination Location" screen will appear. If you accept the default location, click [Next].
If you want to change the installation destination, click [Browse] and specify the desired folder. - In the "Confirmation of installation" screen, verify that the settings shown are correct, and click [Next]. If you decide to specify a different installation location, click [Back].
- When the files have been copied, the "InstallShield Wizard Complete" screen will appear. Click [Finish].
This completes installation of PCR Editor.
[Usage]
In Windows, choose [start].[All Programs].[PCR Editor].
[PCR Editor].
Refer to the online help for an explanation of PCR Editor's functions.
[Uninstallation]
* In order to uninstall software, you must log on to Windows as a user who has administrative privileges.
- Click the Windows Start button, then click Control Panel.
- In "Programs," click "Uninstall a program."
- In the "Uninstall or change a program" list, click "PCR Editor."
- Click [Uninstall].
- When the "Windows needs your permission to continue" screen appears, click [Continue].
- Follow the on-screen directions to uninstall the software.
Installing Project5 LE in Microsoft (R) Windows Vista (TM)
* In order to perform the following steps, you must log on to Windows as a user who has administrative privileges.
- Close all currently running software (applications).
- Place the installation CD-ROM in your computer's CD-ROM drive.
* If the auto-play dialog box appears, choose [Cancel]. - From the Windows Start menu, choose "Computer."
- The screen will show the drives detected by your computer. Choose the CD-ROM drive -> CAKEWALK folder -> P5_LE folder, and then double-click [SETUP].
- The screen will indicate "An unidentified program wants access to your computer"; click [Allow].
- The installer will start up. Follow the on-screen directions to proceed with the installation.
- When the installer has finished, right-click the Project5_LE icon that was created on your desktop.
- In the menu that appears, choose [Properties].
- Choose the "Compatibility" tab, and in "Privilege Level," select "Run this Program as an administrator" and click [OK].
This completes the installation.
[Activation]
When installation is finished, you'll need to activate Project5 LE.
* Before you begin the activation process, make sure that your computer is connected to the Internet.
- Double-click the Project5 LE icon on your desktop; Project5 LE will start up.
- The screen will indicate "An unidentified program wants access to your computer"; click [Allow].
- Start up Project5 LE; the online activation screen will appear. Select "Take me to www.cakewalk.com to register now." and click [OK].
* If you have already obtained the serial number, proceed to step 8. - Your Web browser will start up, and the Cakewalk online activation form will appear. Proceed with activation as directed by the form. The serial number for your software will be sent to you by e-mail.
- Close your Web browser and Project5 LE. Note the serial number that was sent to you by e-mail.
- Double-click the Project5 LE icon on your desktop; Project5 LE will start up.
- The screen will indicate "An unidentified program wants access to your computer"; click [Allow].
- Project5 LE will start up, and the online activation screen will appear. Select"I registered, and was emailed the following Serial Number:", then enter the serial number and click [OK].
This completes activation of Project5 LE.
[Cakewalk VST Adapter]
If your VST plug-ins are not registered correctly, follow the steps below to execute VST Adapter.
- From the Windows Start menu, choose "All Programs"-"Cakewalk"-"Cakewalk VST Adapter 4," and then right-click "Cakewalk VST Adapter 4."
- From the menu that appears, choose "Run as administrator."
- The screen will indicate "An unidentified program wants access to your computer"; click [Allow].
- Cakewalk VST Adapter will start up. Follow the on-screen instructions to find and register your VST plug-ins.
[Note]
The Project5 LE programs themselves are provided on the CD-ROM included with your product.
Installing SD-20 Editor Microsoft (R) Windows Vista (TM)
The SD-20 Editor allows for extensive and convenient control of the SD-20 module from a computer.
[Note]
The SD-20 Editor programs themselves are provided on the CD-ROM included with your product.
[Installation]
Install the software as follows.
* Before you carry out the following steps, you must log on to Windows as a user whose account type is Administrator.
- Close all currently running software (applications).
- In the [EDITOR] folder of the SD-20 CD-ROM, double-click "SETUP."
- "An unidentified program wants access to your computer" will appear click [allow].
- When "Choose Setup Language" appears, choose [English(United States)] and click [OK].
- The installer will start up. When the "Welcome to the InstallShield Wizard for SD-20 Editor" screen appears, click [Next].
- A screen will indicate "Please read the following license agreement carefully." Read the license agreement, and if you accept the terms, click [Yes].
- The